Vivid
Smooth matt
Uniform, contemporary façade appearance. Standard gloss level.
Factory coated
Vivid
Designed around your colour. A refined matt façade surface.
No photograph in this set yet.
What it is
Factory-coated fibre cement façade panel on the high-density Grey Base platform. Smooth matt surface, finished in Finland with a water-based acrylic coating system developed for exterior applications.
Expressions
Vivid
Satin or gloss
Available subject to technical approval and an approved physical sample.
Colour
Nordic Spirit 36 — Skan 101–136
Printed and digital colours are indicative. Approve a physical Skanfas sample. Custom matching requires an approved physical sample before production. Factory edges are colour-matched.
The board
Vivid
This family has no turnable view yet. A finish strip is shown when one is in the image set. A face photograph has not been supplied.
A turnable view waits for a face photograph. The strip, where one is on file, stays as the still.
Formats
The sheets on the record.
- 1220 × 2500 mm
- 1220 × 3050 mm
These are the sizes the calculator is allowed to count. Not an installation layout.
Pictures
What we still need.
Full façadesRGB JPG or WebP · 2400 × 1600 px · 3:2 · no watermark
Surface close-upsRGB JPG or WebP · 1600 × 1600 px · 1:1 · no watermark
Face and edgesRGB JPG or WebP · 1600 × 2000 px · 4:5 · no watermark
FactorysRGB JPG or WebP · 2400 × 1600 px · 3:2 · no watermark
Reserved frames are empty on purpose. The finish strips already delivered are not requested again. Send a new photograph in sRGB, as JPG or WebP, at the size named on the frame, with no watermark. Vivid, Rough and Heavy-Duty still need a face photograph. Skanfas confirms the rights before a picture is published.
Specification
The figures that decide.
- Standard thickness
- 8 mm
- Standard sizes
- 1220 × 2500 mm · 1220 × 3050 mm
- Harmonised standard
- EN 12467:2012 + A2:2018
- Type / category
- NT / Category A
- Strength class
- Class 3
- Reaction to fire
- A2-s1, d0
- Declaration of Performance
- X001 · 30 December 2020
Full technical data
- Standard thickness
- 8 mm
- Standard sizes
- 1220 × 2500 mm · 1220 × 3050 mm
- Approx. weight, 8 mm
- approx. 14 kg/m²
- Other façade thicknesses
- 10 mm and 12 mm, project-specific
- Harmonised standard
- EN 12467:2012 + A2:2018
- Type / category
- NT / Category A
- Strength class
- Class 3
- Mechanical resistance
- ≥ 18 MPa
- Density
- ≥ 1.55 g/cm³
- Water impermeability
- Pass
- Dimensional variations
- Level I
- Reaction to fire
- A2-s1, d0
- Freeze-thaw / warm-water / soak-dry
- RL ≥ 0.75
- Heat-rain
- Pass
- Dangerous substances
- NPD
- Declaration of Performance
- X001 · 30 December 2020
Declared performance is the finished-product DoP X001. Base-board properties are a different assessment basis and are not copied here as interchangeable values.
Use
Where it is specified
Ventilated façade panels where a smooth, even colour is the architectural aim.
Through-coloured: no. Colour and finish are applied to the panel surface.
Fabrication
Factory cut-to-size, drilling and machining are available from Skanfas.
Fabrication
Seal every site-cut edge and site-drilled hole before installation with the Skanfas-approved system for the selected finish.
Fabrication
Installation manuals are referenced for timber, aluminium and steel substructures.
Fabrication
Store panels dry, flat, supported and protected. Install dry panels only.
Documents
For the specification.
Ask Skanfas for the current file.
Coated Panels CP-VAC-001
Rev 1.2 · en
Named by Skanfas as the approved coated-panel baseline. The file is not in this site package yet.
Request document
Request documentDeclaration of Performance X001
Dated 30 December 2020.
Request document
Request documentTechnical datasheet PDF
2026 source exists as an editable document, not as a public download.
Request document
Request documentInstallation manuals
Referenced for timber, aluminium and steel. Final files not in this package.
Coming later
Environmental Product Declaration
Datasheet points to the current Skanfas EPD. The file is not in this package.
Request document
Request documentContinue
