Rough
Structured matt
Textured surface with depth. Characteristic matt finish.
No photograph in this set yet.
What it is
Factory-coated fibre cement façade panel with a structured matt surface. The texture interacts with light and shadow. Finished in Finland with a water-based acrylic coating system developed for exterior applications.
Expressions
Colour
Nordic Spirit 36 — Skan 101–136
Custom matching requires technical assessment, an approved sample and a minimum order. Factory edges are colour-matched. Digital colour is indicative.
The board
Rough
This family has no turnable view yet. A finish strip is shown when one is in the image set. A face photograph has not been supplied.
A turnable view waits for a face photograph. The strip, where one is on file, stays as the still.
Formats
The sheets on the record.
- 1220 × 2500 mm
- 1220 × 3050 mm
These are the sizes the calculator is allowed to count. Not an installation layout.
Pictures
What we still need.
Full façadesRGB JPG or WebP · 2400 × 1600 px · 3:2 · no watermark
Surface close-upsRGB JPG or WebP · 1600 × 1600 px · 1:1 · no watermark
Face and edgesRGB JPG or WebP · 1600 × 2000 px · 4:5 · no watermark
FactorysRGB JPG or WebP · 2400 × 1600 px · 3:2 · no watermark
Reserved frames are empty on purpose. The finish strips already delivered are not requested again. Send a new photograph in sRGB, as JPG or WebP, at the size named on the frame, with no watermark. Vivid, Rough and Heavy-Duty still need a face photograph. Skanfas confirms the rights before a picture is published.
Specification
The figures that decide.
- Standard thickness
- 8 mm
- Standard sizes
- 1220 × 2500 mm · 1220 × 3050 mm
- Harmonised standard
- EN 12467:2012 + A2:2018
- Type / category
- NT / Category A
- Strength class
- Class 3
- Reaction to fire
- A2-s1, d0
- Declaration of Performance
- X002 · 30 December 2020
Full technical data
- Standard thickness
- 8 mm
- Standard sizes
- 1220 × 2500 mm · 1220 × 3050 mm
- Approx. weight, 8 mm
- approx. 14 kg/m²
- Other façade thicknesses
- 10 mm and 12 mm, project-specific
- Harmonised standard
- EN 12467:2012 + A2:2018
- Type / category
- NT / Category A
- Strength class
- Class 3
- Mechanical resistance
- ≥ 18 MPa
- Density
- ≥ 1.55 g/cm³
- Water impermeability
- Pass
- Dimensional variations
- Level I
- Reaction to fire
- A2-s1, d0
- Freeze-thaw / warm-water / soak-dry
- RL ≥ 0.75
- Heat-rain
- Pass
- Dangerous substances
- NPD
- Declaration of Performance
- X002 · 30 December 2020
Declared performance is the finished-product DoP X002.
Use
Where it is specified
New-build and refurbishment façades where a structured matt surface is specified.
Through-coloured: no.
Fabrication
Factory cut-to-size, drilling and machining can be coordinated.
Fabrication
Seal every site-cut edge and site-drilled hole before installation with the Skanfas-approved system for the selected finish.
Fabrication
Store dry, flat and supported. Install dry panels only.
Documents
For the specification.
Ask Skanfas for the current file.
Coated Panels CP-VAC-001
Rev 1.2 · en
Named by Skanfas as the approved coated-panel baseline. The file is not in this site package yet.
Request document
Request documentDeclaration of Performance X002
Dated 30 December 2020.
Request document
Request documentTechnical datasheet PDF
Not published from the editable source.
Request document
Request documentInstallation manuals
Final manuals not in this package.
Coming later
Continue
