Heavy-Duty
Semi-Gloss
Semi-gloss is the gloss used on this site. Skanfas confirmed it. The 2026 datasheet text says Matt. That line is a source conflict, not the value shown here.
No photograph in this set yet.
What it is
Factory-coated fibre cement façade panel for applications where surface durability and a carefully finished appearance are both required. Smooth surface, finished in Finland with a water-based polyurethane coating system.
Expressions
Colour
Nordic Spirit 36 — Skan 101–136
Custom matching requires technical assessment, an approved sample and a minimum order. Factory edges are colour-matched.
The board
Heavy-Duty
This family has no turnable view yet. A finish strip is shown when one is in the image set. A face photograph has not been supplied.
A turnable view waits for a face photograph. The strip, where one is on file, stays as the still.
Formats
The sheets on the record.
- 1220 × 2500 mm
- 1220 × 3050 mm
These are the sizes the calculator is allowed to count. Not an installation layout.
Pictures
What we still need.
Full façadesRGB JPG or WebP · 2400 × 1600 px · 3:2 · no watermark
Surface close-upsRGB JPG or WebP · 1600 × 1600 px · 1:1 · no watermark
Face and edgesRGB JPG or WebP · 1600 × 2000 px · 4:5 · no watermark
FactorysRGB JPG or WebP · 2400 × 1600 px · 3:2 · no watermark
Reserved frames are empty on purpose. The finish strips already delivered are not requested again. Send a new photograph in sRGB, as JPG or WebP, at the size named on the frame, with no watermark. Vivid, Rough and Heavy-Duty still need a face photograph. Skanfas confirms the rights before a picture is published.
Specification
The figures that decide.
- Standard thickness
- 8 mm
- Standard sizes
- 1220 × 2500 mm · 1220 × 3050 mm
- Harmonised standard
- EN 12467:2012 + A2:2018
- Type / category
- NT / Category A
- Strength class
- Class 3
- Reaction to fire
- A2-s1, d0
- Declaration of Performance
- X003 · 30 December 2020
Full technical data
- Standard thickness
- 8 mm
- Standard sizes
- 1220 × 2500 mm · 1220 × 3050 mm
- Approx. weight, 8 mm
- approx. 14 kg/m²
- Other façade thicknesses
- 10 mm and 12 mm, project-specific
- Harmonised standard
- EN 12467:2012 + A2:2018
- Type / category
- NT / Category A
- Strength class
- Class 3
- Mechanical resistance
- ≥ 18 MPa
- Density
- ≥ 1.55 g/cm³
- Water impermeability
- Pass
- Dimensional variations
- Level I
- Reaction to fire
- A2-s1, d0
- Freeze-thaw / warm-water / soak-dry
- RL ≥ 0.75
- Heat-rain
- Pass
- Dangerous substances
- NPD
- Declaration of Performance
- X003 · 30 December 2020
Declared performance is the finished-product DoP X003. The coating system is water-based polyurethane. The gloss on this page is semi-gloss, the value Skanfas confirmed for the site. The 2026 datasheet text says Matt. That difference is a source conflict.
Use
Where it is specified
Façades where the datasheet positions enhanced surface durability together with a smooth finish.
Through-coloured: no.
Fabrication
Factory processing is available from Skanfas.
Fabrication
Seal every site-cut edge and site-drilled hole before installation with the Skanfas-approved system for the selected finish.
Documents
For the specification.
Ask Skanfas for the current file.
Coated Panels CP-VAC-001
Rev 1.2 · en
Named by Skanfas as the approved coated-panel baseline. The file is not in this site package yet.
Request document
Request documentDeclaration of Performance X003
Dated 30 December 2020.
Request document
Request documentTechnical datasheet PDF
Not published from the editable source.
Request document
Request documentInstallation manuals
Final manuals not in this package.
Coming later
Continue
