Metallic
Textured metallic effect
Shimmering surface. Characteristic metallic sheen.
What it is
Factory-coated fibre cement façade panel with a textured, shimmering metallic-effect surface. The finish interacts with changing light and viewing angle. Finished in Finland.
Expressions
Colour
Pearl
Fixed collection of 12 Skanfas shades. Select from current physical samples. Edge is colour-matched; the face effect may differ on the edge.
The board
Metallic
The finish strip stays in place. The turnable board loads only after you open it. It shows face, thickness and edge from that strip. It is not a CAD model.
Finish strip from the 2026 image set. Not a CAD model. The thickness is a geometric study, not a measured sample.
Formats
The sheets on the record.
- 1220 × 2500 mm
- 1220 × 3050 mm
These are the sizes the calculator is allowed to count. Not an installation layout.
Pictures
What we still need.
Full façadesRGB JPG or WebP · 2400 × 1600 px · 3:2 · no watermark
Surface close-upsRGB JPG or WebP · 1600 × 1600 px · 1:1 · no watermark
Face and edgesRGB JPG or WebP · 1600 × 2000 px · 4:5 · no watermark
FactorysRGB JPG or WebP · 2400 × 1600 px · 3:2 · no watermark
Reserved frames are empty on purpose. The finish strips already delivered are not requested again. Send a new photograph in sRGB, as JPG or WebP, at the size named on the frame, with no watermark. Vivid, Rough and Heavy-Duty still need a face photograph. Skanfas confirms the rights before a picture is published.
Specification
The figures that decide.
- Standard thickness
- 8 mm
- Standard sizes
- 1220 × 2500 mm · 1220 × 3050 mm
- Harmonised standard
- EN 12467:2012 + A2:2018
- Type / category
- NT / Category A
- Strength class
- Class 3
- Reaction to fire
- A2-s1, d0
- Declaration of Performance
- X004 · 30 December 2020
Full technical data
- Standard thickness
- 8 mm
- Standard sizes
- 1220 × 2500 mm · 1220 × 3050 mm
- Approx. weight, 8 mm
- approx. 14 kg/m²
- Other façade thicknesses
- 10 mm and 12 mm, project-specific
- Harmonised standard
- EN 12467:2012 + A2:2018
- Type / category
- NT / Category A
- Strength class
- Class 3
- Mechanical resistance
- ≥ 18 MPa
- Density
- ≥ 1.55 g/cm³
- Water impermeability
- Pass
- Dimensional variations
- Level I
- Reaction to fire
- A2-s1, d0
- Freeze-thaw / warm-water / soak-dry
- RL ≥ 0.75
- Heat-rain
- Pass
- Dangerous substances
- NPD
- Declaration of Performance
- X004 · 30 December 2020
Declared performance is the finished-product DoP X004.
Use
Where it is specified
Façades where a metallic-effect surface and changing reflection are specified.
Through-coloured: no.
Fabrication
Factory processing is available from Skanfas.
Fabrication
Seal every site-cut edge and site-drilled hole before installation with the Skanfas-approved system for the selected finish.
Documents
For the specification.
Ask Skanfas for the current file.
Coated Panels CP-VAC-001
Rev 1.2 · en
Named by Skanfas as the approved coated-panel baseline. The file is not in this site package yet.
Request document
Request documentDeclaration of Performance X004
Dated 30 December 2020.
Request document
Request documentTechnical datasheet PDF
Not published from the editable source.
Request document
Request documentInstallation manuals
Final manuals not in this package.
Coming later
Continue
