Artifice
Antique
Signature finish. Subtly weathered, layered appearance.
What it is
Decorative-effect coated fibre cement façade panels. Inspired by aged metals, patinated surfaces and mineral tones. Factory-coated and finished in Finland. The decorative face effect does not continue onto the edges.
Expressions
Artifice
Corrosion
Signature finish. Rich tones and expressive aged-metal variation.
Artifice
Magnetite
Signature finish. Dark, mineral-inspired metallic character.
Artifice
Custom
Project-specific. Technical assessment and a minimum order apply.
Colour
Antique
Edge finish is a coordinating solid colour. The decorative face effect does not continue on edges. Approve current physical samples.
The board
Artifice
The finish strip stays in place. The turnable board loads only after you open it. It shows face, thickness and edge from that strip. It is not a CAD model.
Finish strip from the 2026 image set. Not a CAD model. The thickness is a geometric study, not a measured sample.
Formats
The sheets on the record.
- 1220 × 2500 mm
- 1220 × 3050 mm
These are the sizes the calculator is allowed to count. Not an installation layout.
Pictures
What we still need.
Full façadesRGB JPG or WebP · 2400 × 1600 px · 3:2 · no watermark
Surface close-upsRGB JPG or WebP · 1600 × 1600 px · 1:1 · no watermark
Face and edgesRGB JPG or WebP · 1600 × 2000 px · 4:5 · no watermark
FactorysRGB JPG or WebP · 2400 × 1600 px · 3:2 · no watermark
Reserved frames are empty on purpose. The finish strips already delivered are not requested again. Send a new photograph in sRGB, as JPG or WebP, at the size named on the frame, with no watermark. Vivid, Rough and Heavy-Duty still need a face photograph. Skanfas confirms the rights before a picture is published.
Specification
The figures that decide.
- Standard thickness
- 8 mm
- Standard sizes
- 1220 × 2500 mm · 1220 × 3050 mm
- Harmonised standard
- EN 12467:2012 + A2:2018
- Type / category
- NT / Category A
- Strength class
- Class 3
- Reaction to fire
- A2-s1, d0
- Declaration of Performance
- X005 · 30 December 2020
Full technical data
- Standard thickness
- 8 mm
- Standard sizes
- 1220 × 2500 mm · 1220 × 3050 mm
- Approx. weight, 8 mm
- approx. 14 kg/m²
- Other façade thicknesses
- 10 mm and 12 mm, project-specific
- Harmonised standard
- EN 12467:2012 + A2:2018
- Type / category
- NT / Category A
- Strength class
- Class 3
- Mechanical resistance
- ≥ 18 MPa
- Density
- ≥ 1.55 g/cm³
- Water impermeability
- Pass
- Dimensional variations
- Level I
- Reaction to fire
- A2-s1, d0
- Freeze-thaw / warm-water / soak-dry
- RL ≥ 0.75
- Heat-rain
- Pass
- Dangerous substances
- NPD
- Declaration of Performance
- X005 · 30 December 2020
Declared performance is the finished-product DoP X005, on the coated Grey Base platform.
Use
Where it is specified
Façades that call for layered, weathered or mineral character rather than a uniform paint colour.
Through-coloured: no.
Fabrication
Factory processing is available from Skanfas.
Fabrication
Seal every site-cut edge and site-drilled hole before installation with the Skanfas-approved system for the selected finish.
Documents
For the specification.
Ask Skanfas for the current file.
Coated Panels CP-VAC-001
Rev 1.2 · en
Named by Skanfas as the approved coated-panel baseline. The file is not in this site package yet.
Request document
Request documentDeclaration of Performance X005
Dated 30 December 2020.
Request document
Request documentTechnical datasheet PDF
Not published from the editable source.
Request document
Request documentInstallation manuals
Final manuals not in this package.
Coming later
Continue
