Arboreal Max
Max Smooth
Calm, finely textured full-size panel.
Factory coated
Arboreal Max
Full-size panels with a timber character.
What it is
Factory-finished fibre cement panel on the same material platform as Arboreal plank, in a full-size format. Surfaces are Smooth, Cedar or Grooved. Colour and finish are applied to the surface. A factory-primed panel is not a finished exterior. Through-coloured: no.
Expressions
Arboreal Max
Max Cedar
Pronounced woodgrain on a full-size panel.
Arboreal Max
Max Grooved
Precisely defined linear surface. Directional rhythm through light and shadow.
Arboreal Max
Max primed
Factory-primed Max requires further finishing and is not a finished exterior surface.
Colour
Opaque factory finish: Nordic Spirit, selected NCS and RAL, custom match
Printed colour is indicative. Approve current physical samples. Factory-primed panels require further finishing and are not a finished exterior surface.
The board
Arboreal Max
The finish strip stays in place. The turnable board loads only after you open it. It shows face, thickness and edge from that strip. It is not a CAD model.
Finish strip from the 2026 image set. Not a CAD model. The thickness is a geometric study, not a measured sample.
Formats
The sheets on the record.
- 1220 × 3050 mm
Arboreal Max standard size is 1220 × 3050 mm at 8 mm. 10 mm and 12 mm are project-specific and are not drawn here.
Pictures
What we still need.
Full façadesRGB JPG or WebP · 2400 × 1600 px · 3:2 · no watermark
Surface close-upsRGB JPG or WebP · 1600 × 1600 px · 1:1 · no watermark
Face and edgesRGB JPG or WebP · 1600 × 2000 px · 4:5 · no watermark
FactorysRGB JPG or WebP · 2400 × 1600 px · 3:2 · no watermark
Reserved frames are empty on purpose. The finish strips already delivered are not requested again. Send a new photograph in sRGB, as JPG or WebP, at the size named on the frame, with no watermark. Vivid, Rough and Heavy-Duty still need a face photograph. Skanfas confirms the rights before a picture is published.
Specification
The figures that decide.
- Form
- Max
- Standard thickness
- 8 mm
- Standard size
- 1220 × 3050 mm
- 10 mm and 12 mm
- Project-specific supply. About 15 kg/m² at 10 mm and about 18 kg/m² at 12 mm, when that thickness is available.
- Harmonised standard
- EN 12467:2012 + A2:2018
- Type / category
- NT / Category A
- Strength class
- Class 2
- Reaction to fire
- A2-s1, d0
- Declaration of Performance
- X008 · 31 August 2022
Full technical data
- Form
- Max
- Standard thickness
- 8 mm
- Standard size
- 1220 × 3050 mm
- Approx. weight, 8 mm
- approx. 12 kg/m²
- 10 mm and 12 mm
- Project-specific supply. About 15 kg/m² at 10 mm and about 18 kg/m² at 12 mm, when that thickness is available.
- Harmonised standard
- EN 12467:2012 + A2:2018
- Type / category
- NT / Category A
- Strength class
- Class 2
- Mechanical resistance
- ≥ 7 MPa
- Density
- ≥ 1.30 g/cm³
- Water impermeability
- Pass
- Dimensional variations
- Level I
- Reaction to fire
- A2-s1, d0
- Fire assessment
- EN 13501-1:2018 · NB 1871 · 1871-CPR-RtF-556
- Declaration of Performance
- X008 · 31 August 2022
Declared performance is the Arboreal family DoP X008. The standard Max panel is 1220 × 3050 mm at 8 mm. 10 mm and 12 mm are project-specific. These figures are not plank sizes.
Use
Where it is specified
Broad façade areas on a full-size panel.
Not the 3657 × 210 mm plank.
Fabrication
Factory cut-to-size, drilling and machining can be coordinated.
Fabrication
Seal every site-cut edge and site-drilled hole before installation with the Skanfas-approved system for the selected finish.
Fabrication
Factory-primed Max panels are not a completed exterior finish.
Documents
For the specification.
Ask Skanfas for the current file.
Coated Panels CP-VAC-001
Rev 1.2 · en
Named by Skanfas as the approved coated-panel baseline. The file is not in this site package yet.
Request document
Request documentDeclaration of Performance X008
Dated 31 August 2022. Shared with the Arboreal family. Not a public file in this package.
Request document
Request documentArboreal Max brochure
An English PDF is in the source package. It is not offered as a public download until Skanfas approves it.
Request document
Request documentInstallation manuals
Timber and metal substructure manuals are named in the datasheet. The files are not in this package.
Coming later
Continue
