Arboreal
Plank Solid
Opaque matt on embossed woodgrain. Uniform colour, pronounced timber texture.
What it is
Factory-finished fibre cement plank for ventilated façades. Colour and finish are applied to the surface. Arboreal Max is a separate full-size panel and is not given this plank size. Through-coloured: no.
Expressions
Arboreal
Plank Stained
Translucent stained woodgrain. Layered tone and wood-inspired variation.
Colour
Plank Solid: Nordic Spirit 36, selected NCS and RAL, custom match
Tonal and grain-related variation is an intended characteristic of the translucent stained finish. Printed colour is indicative. Approve current physical samples and use compatible batches on each elevation.
The board
Arboreal
The finish strip stays in place. The turnable board loads only after you open it. It shows face, thickness and edge from that strip. It is not a CAD model.
Finish strip from the 2026 image set. Not a CAD model. The thickness is a geometric study, not a measured sample.
Formats
The sheets on the record.
- 3657 × 210 mm
Plank standard size is 3657 × 210 mm at 8 mm. That size is not an Arboreal Max size.
Pictures
What we still need.
Full façadesRGB JPG or WebP · 2400 × 1600 px · 3:2 · no watermark
Surface close-upsRGB JPG or WebP · 1600 × 1600 px · 1:1 · no watermark
Face and edgesRGB JPG or WebP · 1600 × 2000 px · 4:5 · no watermark
FactorysRGB JPG or WebP · 2400 × 1600 px · 3:2 · no watermark
Reserved frames are empty on purpose. The finish strips already delivered are not requested again. Send a new photograph in sRGB, as JPG or WebP, at the size named on the frame, with no watermark. Vivid, Rough and Heavy-Duty still need a face photograph. Skanfas confirms the rights before a picture is published.
Specification
The figures that decide.
- Form
- Plank
- Standard thickness
- 8 mm
- Standard size
- 3657 × 210 mm
- Harmonised standard
- EN 12467:2012 + A2:2018
- Type / category
- NT / Category A
- Strength class
- Class 2
- Reaction to fire
- A2-s1, d0
- Declaration of Performance
- X008 · 31 August 2022
Full technical data
- Form
- Plank
- Standard thickness
- 8 mm
- Standard size
- 3657 × 210 mm
- Approx. weight, 8 mm
- approx. 12 kg/m²
- Harmonised standard
- EN 12467:2012 + A2:2018
- Type / category
- NT / Category A
- Strength class
- Class 2
- Mechanical resistance
- ≥ 7 MPa
- Density
- ≥ 1.30 g/cm³
- Water impermeability
- Pass
- Dimensional variations
- Level I
- Reaction to fire
- A2-s1, d0
- Fire assessment
- EN 13501-1:2018 · NB 1871 · 1871-CPR-RtF-556
- Intended use
- Internal and external wall cladding
- Declaration of Performance
- X008 · 31 August 2022
Declared performance is DoP X008 for the Arboreal family. Do not compare these Class 2 values with Class 3 coated panel families. The plank size on this page is not a size for Arboreal Max.
Use
Where it is specified
Ventilated façades that use the plank form for a timber rhythm.
A plank size is not a size for Arboreal Max.
Fabrication
Factory cut-to-size, drilling and machining can be coordinated.
Fabrication
Seal every site-cut edge and site-drilled hole before installation with the Skanfas-approved system for the selected finish.
Documents
For the specification.
Ask Skanfas for the current file.
Coated Panels CP-VAC-001
Rev 1.2 · en
Named by Skanfas as the approved coated-panel baseline. The file is not in this site package yet.
Request document
Request documentDeclaration of Performance X008
Dated 31 August 2022. Shared family declaration. Not a public file in this package.
Request document
Request documentInstallation manuals
Plank installation instructions are named in the datasheet. The file is not in this package.
Coming later
Continue
